Adding the Insulation Building With Cross-Laminated TimberWindows, Doors, and UtilitiesThe EnvelopeWolfe Island Passive House — An Introduction As I write these words, it’s the middle of March, and we are just about where we had originally hoped to be by Christmas. I guess three months behind schedule is not actually that bad, and now the snow has suddenly all melted and spring is in the air. It feels like things are much better. If only we weren’t reaching the limit of our funds…This week the crew has been getting everything on the south side of the house finished so the scaffolding can be shifted to the north side next week. The insulation had all been finished, and the window trim completed. We then spent a weekend staining spruce sheathing with Sansin SDF.Why would we bother staining sheathing? Well, the sheathing is only being installed on the overhangs where there is no insulation, and our overhang design will leave the rafters and the sheathing on top of them open. There will be no fascia or soffit because we want the lovely engineered rafters to be seen. Someone said it looked “very European” this week. We’ll take some more detailed pictures once the scaffolding has been moved.On top of the insulation and sheathing we are fitting a Pro-Clima Solitex Plus membrane, which is high-performance and expensive and was luckily bought back when we still had some money. On top of this are going double-width battens, which are secured right through the entire assembly into the cross-laminated timber (CLT) roof structure with very long (and difficult to source) screws. The battens are double-width because eventually they will have to take screws for solar panels too. The metal roof will be installed by Prestige Roofing of Kingston. We can’t afford anything fancy, and luckily we didn’t want anything other than basic galvanized steel, anyway. Building a porch roof to lastDespite the warm winter we’ve been having, Ontario is still a place that often gets plenty of snow. And you have to account for snow load on a house in all kinds of ways. With porches or any lower roof, you have to plan for the sudden shear forces from snow falling from the a higher main roof. A lot of, let’s call them “country porches,” the kind of self-built, not-really-to-code constructions you see all over rural Ontario, look cute, but often aren’t built with shear forces in mind.There are basically two ways of building a porch that is strong enough to resist these shear forces. One is to have the porch as a structurally independent construction, with two sets of posts — one on the outside, as all porches will have, and another on the inside next to the external wall of the house. The other option is to have the porch connected strongly to the structural elements of the house walls.In our case, because the house has solid CLT walls, it is relatively easy to do the latter. This means that connections and the main beams for the porch roof have to be installed now, while we are wrapping the house in insulation.Our porch components, like the main house assembly and the roof rafters, were also designed by Tomaz Stich and prefabricated by Merk in Germany, along with the rest of the house structure. The connections to the house were modeled after another CLT construction that Tomaz is involved in, located in Calgary, and manufactured by Chris of New Leaf Custom Homes, our builder. The engineer who reviewed the design insisted on extra steel brackets, so the connections will be somewhat over-engineered, but they will definitely be strong enough to resist any sudden dump of snow, and probably could be hit by a meteorite from space.Of course, the porch itself will have to wait until the rest of the house is finished and we are able to pour its separate foundation. Winter seems to be coming to an end, so maybe that won’t be so long after all! BLOGS BY DAVID MURAKAMI WOOD RELATED ARTICLES Guide to Roofs and RoofingSynthetic Roofing UnderlaymentsHow to Install Rigid Foam On Top of Roof SheathingRoofing Material Choices Editor’s note: David and Kayo Murakami Wood are building what they hope will be Ontario’s first certified Passive House on Wolfe Island, the largest of the Thousand Islands on the St. Lawrence River. They are documenting their work at their blog, Wolfe Island Passive House. For a list of earlier posts in this series, see the sidebar below. A minor snag with the insulationWe did run into a few minor problems when the crew turned to the north side of the house and the roof. The Schneider-Holz 110 base layer wood-fiber insulation remains messy to cut to size, and we didn’t have enough of the long fasteners we’ve been using to screw the battens and top layer of insulation into the CLT.However, we managed to source another load more from the marvelous Canadian Log Home Supply, and apparently they are already on their way. That’s what I call service!We also don’t have enough of the Schneider-Holz Top 220 waterproof wood fiber insulation top layer, and aren’t going to be able to get any more. We will have to improvise with some 1 1/2-inch Roxul Comfortboard and more housewrap, which at least have the virtue of being relatively cheap and easy to source. The snow and rain that is forecast means the crew won’t be on site for a couple of days.We barely had time to notice that the roofers from Prestige Roofing had arrived before they had finished. We were all away for the time it took them, so we have no pictures of the roofing in progress, just the results! They did a great job.We have arrived at the point where we have very little money, so we have had to go for the most basic choices, without compromising on the quality of the basic materials or the installation. So this is simple galvanized steel with no hidden fasteners or fancy designs. Environmentally, steel might have a fairly high embodied energy, but a steel roof has a long lifespan and it is entirely recyclable at the end of its useful life.